优化体验

emmc_backup_from_sd.sh

@@ -19,10 +19,15 @@ EMMC_DEV="/dev/mmcblk0"
 USB_DIR="/mnt/XIN_USB/rock5c"
 OUTPUT_FILE="${USB_DIR}/rock5c_emmc_$(date +%Y%m%d_%H%M%S).img"
 
-info_msg "从SD卡备份eMMC..."
+info_msg "从SD卡备份eMMC (智能压缩版)..."
 info_msg "eMMC设备: ${EMMC_DEV}"
 info_msg "输出到: ${OUTPUT_FILE}"
 
+# 获取原始eMMC大小
+ORIGINAL_SIZE=$(blockdev --getsize64 ${EMMC_DEV})
+ORIGINAL_SIZE_GB=$((ORIGINAL_SIZE / 1073741824))
+info_msg "原始eMMC大小: ${ORIGINAL_SIZE_GB}GB"
+
 # 检查设备
 [[ -b "${EMMC_DEV}" ]] || error_msg "eMMC设备不存在: ${EMMC_DEV}"
 [[ -d "${USB_DIR}" ]] || error_msg "USB目录不存在: ${USB_DIR}"
@@ -43,70 +48,123 @@ info_msg "检查eMMC数据使用量..."
 TEMP_MOUNT="/tmp/check_emmc"
 mkdir -p "${TEMP_MOUNT}"
 
+# 检查分区是否存在
+[[ -b "${EMMC_DEV}p1" ]] || error_msg "未找到boot分区 ${EMMC_DEV}p1"
+[[ -b "${EMMC_DEV}p2" ]] || error_msg "未找到root分区 ${EMMC_DEV}p2"
+
 # 临时挂载检查使用量
-mount ${EMMC_DEV}p2 "${TEMP_MOUNT}" -o ro
+mount ${EMMC_DEV}p1 "${TEMP_MOUNT}" -o ro
-EMMC_USED=$(df --block-size=1M "${TEMP_MOUNT}" | tail -1 | awk '{print $3}')
+EMMC_BOOT_USED=$(df --block-size=1M "${TEMP_MOUNT}" | tail -1 | awk '{print $3}')
 umount "${TEMP_MOUNT}"
 
-mount ${EMMC_DEV}p1 "${TEMP_MOUNT}" -o ro  
+mount ${EMMC_DEV}p2 "${TEMP_MOUNT}" -o ro
-EMMC_BOOT_USED=$(df --block-size=1M "${TEMP_MOUNT}" | tail -1 | awk '{print $3}')
+EMMC_ROOT_USED=$(df --block-size=1M "${TEMP_MOUNT}" | tail -1 | awk '{print $3}')
 umount "${TEMP_MOUNT}"
 
 rm -rf "${TEMP_MOUNT}"
 
-info_msg "eMMC使用情况: Root ${EMMC_USED}MB + Boot ${EMMC_BOOT_USED}MB"
+TOTAL_USED=$((EMMC_BOOT_USED + EMMC_ROOT_USED))
+info_msg "eMMC使用情况: Boot ${EMMC_BOOT_USED}MB + Root ${EMMC_ROOT_USED}MB = 总计 ${TOTAL_USED}MB"
+MIN_TARGET_SIZE=$((TOTAL_USED + 1024))  # 需要1GB额外空间
+info_msg "最小目标eMMC: ${MIN_TARGET_SIZE}MB (约$((MIN_TARGET_SIZE / 1024))GB)"
 
 # 步骤2: 智能收缩eMMC分区
 info_msg "步骤2: 智能收缩eMMC分区..."
 
+# 记录原始分区信息
+parted -s ${EMMC_DEV} unit s print > "${USB_DIR}/original_partition.txt"
+P1_START=$(parted -s ${EMMC_DEV} unit s print | grep "^ 1" | awk '{print $2}' | sed 's/s$//')
+P1_END=$(parted -s ${EMMC_DEV} unit s print | grep "^ 1" | awk '{print $3}' | sed 's/s$//')
+P2_START=$(parted -s ${EMMC_DEV} unit s print | grep "^ 2" | awk '{print $2}' | sed 's/s$//')
+ORIGINAL_P2_END=$(parted -s ${EMMC_DEV} unit s print | grep "^ 2" | awk '{print $3}' | sed 's/s$//')
+
+info_msg "分区布局: P1=${P1_START}s-${P1_END}s, P2=${P2_START}s-${ORIGINAL_P2_END}s"
+
 # 文件系统检查
 e2fsck -f -y ${EMMC_DEV}p2
 
 # 先尝试收缩到最小值
 info_msg "计算文件系统最小大小..."
-resize2fs -M ${EMMC_DEV}p2
+resize2fs -M ${EMMC_DEV}p2 2>&1 | tee /tmp/resize.log
 
 # 获取收缩后的实际大小
 FS_SIZE_BLOCKS=$(dumpe2fs -h ${EMMC_DEV}p2 2>/dev/null | grep "^Block count:" | awk '{print $3}')
-FS_SIZE_MB=$(( (FS_SIZE_BLOCKS * 4) / 1024 + 200 ))  # 块大小4KB + 200MB缓冲
+BLOCK_SIZE=$(dumpe2fs -h ${EMMC_DEV}p2 2>/dev/null | grep "^Block size:" | awk '{print $3}')
+
+# 添加默认值防止空值
+[[ -z "$FS_SIZE_BLOCKS" ]] && FS_SIZE_BLOCKS=1048576  # 默认4GB worth of blocks
+[[ -z "$BLOCK_SIZE" ]] && BLOCK_SIZE=4096  # 默认4K
+
+FS_SIZE_MB=$(( (FS_SIZE_BLOCKS * BLOCK_SIZE) / 1048576 ))
 
 info_msg "文件系统最小大小: ${FS_SIZE_MB}MB"
 
-# 扩展一点给缓冲空间
+# 添加缓冲空间确保系统能正常运行
-SHRINK_TARGET=$((FS_SIZE_MB + 300))
+SHRINK_TARGET=$((FS_SIZE_MB + 512))  # 512MB缓冲
 resize2fs ${EMMC_DEV}p2 ${SHRINK_TARGET}M
 
-# 收缩分区
+# 计算新的分区结束位置(扇区)
-P2_START=$(parted -s ${EMMC_DEV} unit B print | grep "^ 2" | awk '{print $2}' | sed 's/B$//')
+NEW_P2_END_SECTORS=$((P2_START + (SHRINK_TARGET * 1048576 / 512)))
-NEW_P2_END=$((P2_START + SHRINK_TARGET * 1048576))
-
-# 记录原始分区信息
-parted -s ${EMMC_DEV} unit B print > "${USB_DIR}/emmc_original_layout.txt"
-ORIGINAL_P2_END=$(parted -s ${EMMC_DEV} unit B print | grep "^ 2" | awk '{print $3}' | sed 's/B$//')
 
 # 重新创建收缩的分区
 parted -s ${EMMC_DEV} rm 2
-parted -s ${EMMC_DEV} mkpart primary ext4 ${P2_START}B ${NEW_P2_END}B
+parted -s ${EMMC_DEV} unit s mkpart primary ext4 ${P2_START}s ${NEW_P2_END_SECTORS}s
 
-info_msg "✅ eMMC分区已收缩"
+partprobe ${EMMC_DEV}
+sleep 2
 
-# 步骤3: 备份收缩后的eMMC
+info_msg "✅ eMMC分区已收缩到 ${SHRINK_TARGET}MB"
-info_msg "步骤3: 备份收缩后的eMMC..."
+
-BACKUP_SIZE_MB=$(( (NEW_P2_END / 1048576) + 100 ))
+# 步骤3: 创建备份信息文件
-dd if=${EMMC_DEV} of="${OUTPUT_FILE}" bs=1M count=${BACKUP_SIZE_MB} status=progress
+info_msg "步骤3: 创建备份信息..."
+
+cat > "${OUTPUT_FILE}.info" <<EOF
+#!/bin/bash
+# 备份信息文件 - 用于智能恢复
+BACKUP_DATE="$(date)"
+SOURCE_SIZE_GB=${ORIGINAL_SIZE_GB}
+DATA_USED_MB=${TOTAL_USED}
+MIN_TARGET_SIZE_MB=${MIN_TARGET_SIZE}
+
+# 分区信息
+P1_START=${P1_START}
+P1_END=${P1_END}
+P2_START=${P2_START}
+P2_SHRUNK_END=${NEW_P2_END_SECTORS}
+ORIGINAL_P2_END=${ORIGINAL_P2_END}
+EOF
+
+# 步骤4: 备份收缩后的eMMC
+info_msg "步骤4: 备份收缩后的eMMC..."
+# 确保包含完整的GPT备份表（通常在磁盘末尾）
+# GPT需要首尾各34个扇区，再加一些缓冲
+BACKUP_SIZE_SECTORS=$((NEW_P2_END_SECTORS + 34 + 2048))  # 34扇区GPT + 1MB额外缓冲
+BACKUP_SIZE_MB=$((BACKUP_SIZE_SECTORS * 512 / 1048576))
+
+info_msg "备份大小: ${BACKUP_SIZE_MB}MB (原始: ${ORIGINAL_SIZE_GB}GB, 可恢复到: ≥${MIN_TARGET_SIZE}MB)"
+
+dd if=${EMMC_DEV} of="${OUTPUT_FILE}" bs=512 count=${BACKUP_SIZE_SECTORS} status=progress
+
+# 修复GPT备份表
+info_msg "修复备份镜像的GPT表..."
+sgdisk -e "${OUTPUT_FILE}" 2>/dev/null || true
 
 info_msg "✅ eMMC备份完成"
 
-# 步骤4: 恢复eMMC原始大小
+# 步骤5: 恢复eMMC原始大小
-info_msg "步骤4: 恢复eMMC原始分区大小..."
+info_msg "步骤5: 恢复eMMC原始分区大小..."
 parted -s ${EMMC_DEV} rm 2
-parted -s ${EMMC_DEV} mkpart primary ext4 ${P2_START}B ${ORIGINAL_P2_END}B
+parted -s ${EMMC_DEV} unit s mkpart primary ext4 ${P2_START}s ${ORIGINAL_P2_END}s
+
+partprobe ${EMMC_DEV}
+sleep 2
+
 resize2fs ${EMMC_DEV}p2
 
-info_msg "✅ eMMC已恢复原始大小"
+info_msg "✅ eMMC已恢复原始大小 ${ORIGINAL_SIZE_GB}GB"
 
 # 验证备份镜像
-info_msg "步骤5: 验证备份镜像..."
+info_msg "步骤6: 验证备份镜像..."
 LOOP_DEV=$(losetup -P -f --show "${OUTPUT_FILE}")
 sleep 3
 
@@ -126,18 +184,77 @@ losetup -d "${LOOP_DEV}"
 FINAL_SIZE=$(du -h "${OUTPUT_FILE}" | cut -f1)
 FINAL_SIZE_ACTUAL=$(du --apparent-size -h "${OUTPUT_FILE}" | cut -f1)
 
+# 创建智能恢复脚本
+RESTORE_SCRIPT="${USB_DIR}/restore_adaptive.sh"
+cat > "${RESTORE_SCRIPT}" <<'RESTORE_EOF'
+#!/bin/bash
+# 自适应恢复脚本 - 支持不同大小的eMMC
+
+set -e
+IMAGE_FILE="$1"
+TARGET_DEV="/dev/mmcblk0"
+
+[[ -f "${IMAGE_FILE}" ]] || { echo "用法: $0 <镜像文件>"; exit 1; }
+[[ -f "${IMAGE_FILE}.info" ]] || { echo "缺少信息文件"; exit 1; }
+
+source "${IMAGE_FILE}.info"
+
+echo "恢复镜像到eMMC"
+echo "目标设备: ${TARGET_DEV}"
+
+TARGET_SIZE=$(blockdev --getsize64 ${TARGET_DEV})
+TARGET_SIZE_MB=$((TARGET_SIZE / 1048576))
+
+echo "目标eMMC: $((TARGET_SIZE / 1073741824))GB"
+
+if [[ ${TARGET_SIZE_MB} -lt ${MIN_TARGET_SIZE_MB} ]]; then
+    echo "错误: 目标eMMC太小，需要至少 ${MIN_TARGET_SIZE_MB}MB"
+    exit 1
+fi
+
+echo "警告: 将清空 ${TARGET_DEV}!"
+read -p "继续? (yes): " confirm
+[[ "$confirm" == "yes" ]] || exit 1
+
+echo "写入镜像..."
+dd if="${IMAGE_FILE}" of=${TARGET_DEV} bs=4M status=progress
+sync
+
+partprobe ${TARGET_DEV}
+sleep 3
+
+# 扩展分区到最大
+MAX_P2_END=$((TARGET_SIZE / 512 - 34))
+parted -s ${TARGET_DEV} rm 2
+parted -s ${TARGET_DEV} unit s mkpart primary ext4 ${P2_START}s ${MAX_P2_END}s
+partprobe ${TARGET_DEV}
+sleep 2
+
+e2fsck -f -y ${TARGET_DEV}p2
+resize2fs ${TARGET_DEV}p2
+
+echo "✅ 恢复完成! 分区已扩展到最大空间"
+RESTORE_EOF
+
+chmod +x "${RESTORE_SCRIPT}"
+
 info_msg "========================================="
-info_msg "🎉 eMMC备份成功完成!"
+info_msg "🎉 智能eMMC备份成功完成!"
 info_msg "========================================="
 info_msg "📁 备份文件: ${OUTPUT_FILE}"
-info_msg "📏 实际大小: ${FINAL_SIZE}"
+info_msg "📏 备份大小: ${FINAL_SIZE}"
-info_msg "📐 逻辑大小: ${FINAL_SIZE_ACTUAL}"
+info_msg "📄 信息文件: ${OUTPUT_FILE}.info"
-info_msg "💾 eMMC已恢复原状"
+info_msg "🔧 恢复脚本: ${RESTORE_SCRIPT}"
 info_msg ""
-info_msg "🚀 部署到新设备:"
+info_msg "源eMMC: ${ORIGINAL_SIZE_GB}GB"
-info_msg "   dd if=$(basename ${OUTPUT_FILE}) of=/dev/mmcblk0 bs=4M status=progress"
+info_msg "数据使用: ${TOTAL_USED}MB"
+info_msg "最小目标: ${MIN_TARGET_SIZE}MB (约$((MIN_TARGET_SIZE / 1024))GB)"
 info_msg ""
-info_msg "✅ 包含完整分区表和bootloader"
+info_msg "🚀 恢复方法:"
-info_msg "✅ 保持所有原始配置不变"
+info_msg "   1. 从SD卡启动目标设备"
-info_msg "✅ 可在任意Rock5c上启动"
+info_msg "   2. 运行: bash ${RESTORE_SCRIPT} ${OUTPUT_FILE}"
+info_msg ""
+info_msg "✅ 支持恢复到任意大小eMMC (≥${MIN_TARGET_SIZE}MB)"
+info_msg "✅ 自动扩展分区到最大可用空间"
+info_msg "✅ 保持双分区结构不变"
 info_msg "========================================="

files_download.txt

@@ -1 +1 @@
-http://xplayer-ota.pureroad.cn/files_20250920_172015.tar.xz
+http://xplayer-ota.pureroad.cn/files_20251203_232832.tar.xz

playbooks/site.yml

@@ -1,12 +1,78 @@
 - name: Configure Xplayer Server
   hosts: localhost
   become: yes
-  
+
+  vars:
+    packages: "bluez \
+          mpc \
+          libasound2-dev \
+          libudev-dev \
+          libfmt-dev \
+          libfmt9 \
+          libchromaprint1 \
+          libupnp17 \
+          libnfs14 \
+          libavutil58 \
+          libavformat60 \
+          libavcodec60 \
+          libcdio-paranoia2 \
+          libcdio-cdda2 \
+          libcdio19 \
+          libmms0 \
+          libsoxr0 \
+          libid3tag0 \
+          libiso9660-11 \
+          libzzip-0-13 \
+          libao4 \
+          libjack-jackd2-0 \
+          libpipewire-0.3-0 \
+          libpulse0 \
+          libshout3 \
+          libsndio7.0 \
+          libopenal1 \
+          libavahi-common3 \
+          libavahi-client3 \
+          libadplug-2.3.3-0 \
+          libflac12 \
+          libfluidsynth3 \
+          libaudiofile1 \
+          libfaad2 \
+          libgme0 \
+          libmad0 \
+          libmikmod3 \
+          libmodplug1 \
+          libmpcdec6 \
+          libmpg123-0 \
+          libopus0 \
+          libsndfile1 \
+          libogg0 \
+          libvorbis0a \
+          libwavpack1 \
+          libwildmidi2 \
+          libvorbisenc2 \
+          libmp3lame0 \
+          libtwolame0 \
+          libshine3 \
+          net-tools \
+          libconfig9 \
+          avahi-daemon
+          libdbus-1-3 \
+          libglib2.0-0 \
+          libbluetooth3 \
+          libsbc1 \
+          libfdk-aac2 \
+          libldacbt-abr2 \
+          libldacbt-enc2 \
+          aria2 \
+          cloud-guest-utils"
+
   tasks:
     - name: update script
       shell:
         cmd: |
-          rm -rf /etc/apt/sources.list.d/jean-francois-dockes-ubuntu-upnpp1-noble.sources
+          /usr/bin/install_bluealsa_openaptx.sh
+      ignore_errors: yes
+
     - name: switch mirror
       copy:
         src: ../files/sources.list.d/
@@ -14,71 +80,73 @@
         mode: '0644'
       tags: apt
 
-    - name: install dependencies
+    - name: check missing packages
-      apt:
+      shell:
-        name:
+        cmd: |
-          - bluez
+          MISSING=""
-          - mpc
+          for pkg in {{ packages }}; do
-          - libasound2-dev
+            # 先检查原包名
-          - libudev-dev
+            if dpkg-query -W -f='${Status}' "$pkg" 2>/dev/null | grep -q "install ok installed"; then
-          - libfmt-dev
+              continue
-          - libfmt9
+            # 如果原包名不存在，尝试检查带 t64 后缀的版本
-          - libchromaprint1
+            elif dpkg-query -W -f='${Status}' "${pkg}t64" 2>/dev/null | grep -q "install ok installed"; then
-          - libupnp17
+              continue
-          - libnfs14
+            else
-          - libavutil58
+              MISSING="yes"
-          - libavformat60
+              break
-          - libavcodec60
+            fi
-          - libcdio-paranoia2
+          done
-          - libcdio-cdda2
+          if [ -n "$MISSING" ]; then
-          - libcdio19
+            echo "missing"
-          - libmms0
+          else
-          - libsoxr0
+            echo "all_installed"
-          - libid3tag0
+          fi
-          - libiso9660-11
+      args:
-          - libzzip-0-13
+        executable: /bin/bash
-          - libao4
+      register: package_check
-          - libjack-jackd2-0
+      changed_when: false
-          - libpipewire-0.3-0
+      ignore_errors: yes
-          - libpulse0
-          - libshout3
-          - libsndio7.0
-          - libopenal1
-          - libavahi-common3
-          - libavahi-client3
-          - libadplug-2.3.3-0
-          - libflac12
-          - libfluidsynth3
-          - libaudiofile1
-          - libfaad2
-          - libgme0
-          - libmad0
-          - libmikmod3
-          - libmodplug1
-          - libmpcdec6
-          - libmpg123-0
-          - libopus0
-          - libsndfile1
-          - libogg0
-          - libvorbis0a
-          - libwavpack1
-          - libwildmidi2
-          - libvorbisenc2
-          - libmp3lame0
-          - libtwolame0
-          - libshine3
-          - libmp3lame0
-          - libtwolame0
-          - net-tools
-          - libconfig9
-          - avahi-daemon
-          # - upmpdcli
-        state: present
-        cache_valid_time: 3153600  # 365天缓存
-        update_cache: no
-      become: yes
       tags: apt
 
+    - name: update apt cache
+      shell:
+        cmd: |
+          if command -v apt-fast &> /dev/null; then
+            apt-fast update -y || apt-get update -y
+          else
+            apt-get update -y
+          fi
+      when: package_check.stdout == "missing"
+      ignore_errors: yes
+      tags: apt
+
+    - name: install dependencies
+      shell:
+        cmd: |
+          if command -v apt-fast &> /dev/null; then
+            apt-fast install -y {{ packages }} || apt-get install -y {{ packages }}
+          else
+            apt-get install -y {{ packages }}
+          fi
+      when: package_check.stdout == "missing"
+      ignore_errors: yes
+      tags: apt
+
+    - name: Create directories
+      file:
+        path: "{{ item.path }}"
+        state: directory
+        mode: "{{ item.mode | default('0755') }}"
+        recurse: yes
+      loop:
+        - path: /var/lib/mpd/playlists
+        - path: /var/lib/mpd/music
+        - path: /usr/local/lib/systemd/system
+        - path: /srv/login
+        - path: /usr/var/lib/bluealsa
+        - path: /srv/bluez-alsa
+
+
     - name: Copy static files
       copy:
         src: "{{ item.src }}"
@@ -112,17 +180,15 @@
         - src: ../files/led-startup.sh
           dest: /usr/bin/led-startup.sh
           mode: '0755'
-
+        - src: ../files/xplayer-start.sh
-    - name: Create directories
+          dest: /usr/local/bin/xplayer-start.sh
-      file:
+          mode: '0755'
-        path: "{{ item.path }}"
+        - src: ../files/apt-fast
-        state: directory
+          dest: /usr/local/bin/apt-fast
-        mode: "{{ item.mode | default('0755') }}"
+          mode: '0755'
-      loop:
+        - src: ../files/apt-fast.conf
-        - path: /var/lib/mpd/playlists
+          dest: /etc/apt-fast.conf
-        - path: /var/lib/mpd/music
+          mode: '0644'
-        - path: /usr/local/lib/systemd/system
-        - path: /srv/login
 
     - name: update mpd data
       copy:
@@ -169,6 +235,29 @@
       register: copy_result
       changed_when: copy_result.changed or (force_update | default(false) | bool)
 
+    - name: update bluealsa
+      copy:
+        src: "{{ item.src }}"
+        dest: "{{ item.dest }}"
+        mode: "{{ item.mode | default('0644') }}"
+      loop:
+        - src: ../files/bluealsa.service
+          dest: /etc/systemd/system/bluealsa.service
+        - src: ../files/install_bluealsa_openaptx.sh
+          dest: /usr/bin/install_bluealsa_openaptx.sh
+          mode: '0755'
+        - src: ../files/bluealsa_bundle.tar.gz
+          dest: /srv/bluez-alsa/bluealsa_bundle.tar.gz
+      tags: bluealsa
+      notify:
+        - install_bluealsa_openaptx
+        - reload_systemd
+        - enable_bluealsa
+        - stop_bluealsa
+        - start_bluealsa
+      register: copy_result
+      changed_when: copy_result.changed or (force_update | default(false) | bool)
+
     - name: update camilladsp
       copy:
         src: "{{ item.src }}"
@@ -210,6 +299,7 @@
           mode: '0755'
         - src: ../files/99-usb-auto-mount.rules
           dest: /etc/udev/rules.d/99-usb-auto-mount.rules
+          
           mode: '0644'
       tags: usb
       notify:
@@ -378,6 +468,23 @@
       shell:
         cmd: systemctl restart sing-box
 
+    - name: install_bluealsa_openaptx
+      shell:
+        cmd: /usr/bin/install_bluealsa_openaptx.sh
+
+    - name: enable_bluealsa
+      shell:
+        cmd: systemctl enable bluealsa
+    - name: stop_bluealsa
+      shell:
+        cmd: systemctl stop bluealsa
+    - name: start_bluealsa
+      shell:
+        cmd: systemctl start bluealsa
+    - name: restart_bluealsa
+      shell:
+        cmd: systemctl restart bluealsa
+
     - name: enable_xplayer_server
       shell:
         cmd: systemctl enable xplayer-server
@@ -392,6 +499,7 @@
 
     - name: reboot_required
       shell:
-        cmd: echo "need reboot"
+        cmd: sync && reboot
-    
+
+
 

sync.sh

@@ -32,6 +32,12 @@ rsync 5c:/usr/bin/sing-box files/sing-box
 rsync 5c:/etc/systemd/system/sing-box.service files/sing-box.service
 rsync -avz --exclude='login/' 5c:/srv/login/ files/login/
 rsync 5c:/usr/bin/led-startup.sh files/led-startup.sh
+rsync 5c:/usr/local/bin/xplayer-start.sh files/xplayer-start.sh
+rsync 5c:/usr/bin/install_bluealsa_openaptx.sh files/install_bluealsa_openaptx.sh
+rsync 5c:/etc/systemd/system/bluealsa.service files/bluealsa.service
+rsync 5c:/srv/bluez-alsa/bluealsa_bundle.tar.gz files/bluealsa_bundle.tar.gz
+rsync 5c:/usr/local/bin/apt-fast files/apt-fast
+rsync 5c:/etc/apt-fast.conf files/apt-fast.conf
 
 # Clean up macOS resource fork files
 find files -name "._*" -type f -delete